TL-25M3340D_F2301-S1.wnc -2030Jul03.htm

Job Sheet-25M3340D_F2301-S1.wnc

Path : D:\SeJong\Model\A-TECH\2025\25M3340D\2301\2301-4(18DEG)\

Geometry : 25M3340D_F2301_250624.x_t.wnc

P/G : M042030Jul03.htm


X_Min : -695.000, X_Set_A : -700.000	Y_Max : 185.101, Y_Set_A : 190.101	Z_Max : -0.000
X_Max : 695.000, X_Set_A : 700.000	Y_Min : 0.001, Y_Set_A : -4.999	Z_Min : -230.000
X_Center : -0.000	Y_Center : 92.551
X_Length 1390.00	Y_Length 185.10	Z_Length 230.00

images/basepart.png

Warning,,,Y Eccentric,,, :Y_Center : 92.55
..

---|Warning---Z_Max: : -0.00 ---
---|Warning---Z_Min : : -230.00 ---

	ToolPath_No.						Krpm	Feed Rate	Approach Rate	Z-Step	Angle A,B,C
	2		Bull-nose D 25.96 r 1.00	25.96	1.00	$images\outil2.tool.png$	3.1	2300	2500	0.05
10	1	10	Bull-nose D 25.96 r 1.00	25.96	1.00	$images\outil1.tool.png$	3.1	2300	2500	0.05
22	2.4	22	Tapper D 16.00	16.00		$images\outil2.4.tool.png$	0.1	200	5000
23	2.3	23	Drill D 0.01	16.00		$images\outil2.3.tool.png$	2.3	100	5000
24	2.1	24	Centering Drill D 10.00	10.00		$images\outil2.1.tool.png$	1.6	60	5000
25	2.2	25	Drill D 15.00	15.00		$images\outil2.2.tool.png$	0.3	45	5000
Tool_No_List :: 10, 22, 23, 24, 25